Bingo Plus

List of contents of this article:

• 1, How to solve the car fault light
• 2、car faultLamp
• 3,Bingo Plus How to solve the problem that the car fault light is on?
• 4, What to do when the car fault light is on? How to eliminate it

How to solve the car fault light

1. This kind of fault problem needs to be overhauled by a professional car repair shop. Oil indicator light: The oil indicator light turns on, indicating that the oil pressure of the vehicle exceeds the normal range. If it exists for a long time, it will lead to the scrapping of the engine. At this time, it needs to be repaired as soon as possible.

2. If the fault light is not on because of a problem with the car parts, but because of a failure in the electronic system, you can also go to a professional place to read the fault code with a computer, and then clear the fault code to solve the problem of the fault light on the car dashboard.

3. The car fault light is on. Elimination method: start and turn off the vehicle three times in a row, or unplug the negative pole of the engine battery, wait for 30 seconds before connecting it.

Car fault light

Car fault light is a light used to indicate car fault, which is generally divided into oil alarm light, water temperature alarm light, engine fault light, brake system fault light, steering assistant alarm light, door or front engine cover not closed prompt light. , tire pressure alarm light, ABS alarm light and battery alarm light.

Common car fault lights include oil warning lights, water temperature indicator lights, engine fault lights, brake system fault lights, ABS fault lights, low oil pressure warning lights, seat belt indicator lights, etc. Oil warning light. Only normal oil pressure can ensure that the oil is transported to the surface of all friction parts of the engine.

Tire pressure warning lights, water temperature warning lights, oil pressure indicator lights, and brake system warning lights are all common fault lights in cars.Tire pressure warning light. Yellow logo, an irregular circle without a seal, four small spikes below, and an exclamation mark inside.

How to solve the problem that the car fault light is on?

1. The solution to the problem of the car fault light is as follows: check whether there is a problem with the battery connector, disconnect the negative pole and connect it again, and then get on the car to ignite. The power generation of the generator is measured. The voltage is about 14v, indicating that it is not a problem of insufficient power generation of the generator.

2. The car fault light is on to eliminate it: start and turn off the vehicle three times in a row, or unplug the negative pole of the engine battery, wait for 30 seconds before connecting it.

3. If the brake pad is worn, just replace it; insufficient brake fluid will affect the brake performance, and you need to go to the repair shop for inspection immediately.If the incident happens suddenly, the owner can first check whether the brake fluid level is normal, and observe the brake fluid level sensor and combination instrument.

4. If the fault light does not turn on because there is a problem with the car parts, but because the electronic system fails, you can also go to a professional place to read the fault code with a computer, and then clear the fault code, and you can solve the problem of the fault light on the car dashboard.

5. What to do if the fault light of the body stability system is on? If the fault light of the body stability system is on, the following measures need to be taken: Parking inspection: First, stop immediately and thoroughly check the car to see if there are obvious faults, such as whether the wheels, brake system, suspension and other parts are faulty.

6. The easiest way to eliminate the fault light. I got a driver's license some time ago., I drove my father's car, but the car took a long time. Halfway through the drive, the prompt light on the dashboard turned on, showing that there was a malfunction. So I also studied the coping method.

What to do when the car fault light is on

How to eliminate the car fault light on: Start and turn off the vehicle three times in a row, or unplug the negative pole of the engine battery, wait for 30 seconds before connecting.

Under minor conditions, the owner can first check the water temperature gauge and oil pressure alarm by himself. If there is no problem, he can continue to drive, but he must go to a special repair shop for inspection and troubleshooting afterwards. If it is not solved in time, the exhaust of the car will increase, increase fuel consumption, wear the engine, and affect the driving quality.

How to deal with the yellow light of the car engine fault light? This is a problem that many car owners will encounter, but many people do not know about it and even ignore this warning signal, resulting in more serious damage to the engine. Let me introduce you to how to deal with the yellow light of the car engine fault light. I hope I can help you.Check whether the gas cover is tightened.