DigiPlus Philippine

Contents of this article IView:

• 1,DigiPlus Philippine mbr How to set the boot when the system migrates to the gpt hard disk
• 2, Is it okay to install the system backup previously installed on the mechanical hard disk into the solid-state drive?
• 3, How to migrate the system to ssd
• 4, diskgenius system. After migration, the hard disk inserted into the hard disk box can be directly plugged into the use

mbr How to set up boot when the system migrates to the gpt hard disk

1, restart the computer and repeatedly press the function key (usually FFF3 or FDEL) to enter the BIOS settings when the first screen is seen. Under the BOOT tab, select "UEFI/BIOS Boot Mode" and change Legacy to UEFI. Then save the exit interface.

2. Unable to migrate, two different partitionsThe boot format is different. The MBR boot partition is the system partition, and GPT has an independent boot partition. It is recommended to reinstall the operating system for the change mode.

3. First of all, the GUID format requires UEFI startup (set in the BIOS). The system boot of UEFI startup is in ESP, and you need to use EasyUEFI or BOOTICE to establish the boot. OK, in this way, the system of disk C will start. In short, reinstalling is easier than this. If you pursue self-satisfaction, you can challenge it.

Is it okay to install the system backup previously installed on the mechanical hard disk into the solid-state drive?

Yes. The previously backed up system GHO files can be restored to the solid-state drive.Of course, solid-state drives also need to be partitioned and aligned with 4K before restoring the system.

Follow the prompts to migrate the system in the original mechanical hard disk to the solid-state disk.

This is very simple. After installing the solid state, the installation system is the same as before, just choose the position and select the solid state disk. You can choose USB flash drive or CD-ROM to install the system. Now the mainstream is USB flash drive boot installation. It comes up as soon as Baidu searches. It's very simple and you don't need to go to the computer repair shop.

The system in the mechanical hard disk can be ported to the solid-state drive through the following steps. Search DiskGenius on Baidu and click to enter the first link. Click the download button at the top of the page to enter the download interface. Choose the version that suits you and click the Download Now button.

How to migrate the system to ssd

Download the partition assistant, play Open the main page. Select "Migrate System to Solid State Drive". Click "Next" when the dialog box appears. Select "Unallocated Space" on the solid-state drive and click "Next" to continue.In this window, you can modify the size, position and disk character, usually keeping the default settings.

First, open the software and find the "Migrate System to Solid-state Disk" option in the upper left corner of the software interface. We click this option to proceed to the next operation. 2 Then a window to migrate the system to solid-state disk will pop up on the interface. We find the "Next" button in the lower right corner of the window and click it. 3 Then enter the selection.

To migrate the mechanical disk system to the solid state, you need a partition assistant to download and open it. After opening the partition assistant, click the original system partition, and then click the migration system to solid state on the left.

Download the partition assistant and open the main page. Choose to migrate the system to ssd. A dialog box appears, and then click "Next". Select "Unallocated Space" on the solid-state drive, and then click "Next" to continue.When installing the system, there is no difference between the installation method of the system installed on the mechanical hard disk or the solid-state drive.

After opening the partition software, click the solid-state drive to see a new mechanical hard disk. Then click the [Migrate System to Solid State Drive] button in the [Widerd] on the left. Enter the new operation interface to read the instructions clearly, and then click [Next]. Download the partition assistant and open the main page. Select "Migrate System to Solid State Drive".

First, connect the new solid-state drive to the computer, and then open the "Update and Security" menu in "Settings". In the left menu, select "Migrate to New Computer". You will see the "Migrate to New Computer" wizard. Just follow the prompts of the wizard.

diskgenius system. After migration, the hard disk inserted into the hard disk box can be directly plugged into the use

Baidu download and install [partition assistant]. Open the partition assistant software, select the solid-state drive, and click Partition Alignment. Click Submit to complete the partition alignment. Select the mechanical hard disk and click [Migrate System to Solid State Drive]. Click [Next]. Select the solid-state drive and click [Next].

Generally speaking, when solid-state drives are used together with mechanical hard disks, solid-state hard disks are used as system disks. It is recommended to put the files released by the operating system and software installation in the solid-state drive, which can improve the speed and efficiency of system and software operation.

Search DiskGenius on Baidu and click to enter the first link.Click the download button at the top of the page to enter the download interface. Choose the version that suits you and click the Download Now button. Open the downloaded software, click the tool option above the software, and click the clone disk option in the submenu.

But the new solid-state partition needs to be partitioned, and then the system needs to be loaded into the solid state. It is recommended to find professional maintenance personnel to install the system.